MERESET WASTE INK COUNTER PADA
CANON MP160 DAN MP145
1. Matikan printer (kabel power masih
 tercolok), tekan dan tahan tombol
 STOP/RESET kemudian tekan tombol
 ON/OFF
2. Tahan tombol ON/OFF, tekan tombol
 STOP/RESET 2x


3. Lepaskan kedua tombol dan printerakan masuk ke SERVICE MODE
4. Printer akan charging
5. Setelah printer selesai charging,tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF
 akan berubah warna hijau dan oranye.
7. Matikan printer dan cabut kabel POWER.
8. Hidupkan kembali printer


Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported
 ink cartridge is installed, or the ink cartridges are not
 installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support
 Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

ini nich yang mau donlot resetternya....
 MPTool.exe

Read More..

Component Cleaning and Handling Techniques
Canon® AX,BX,EX,LX,NX,PX,VX,WX
Component Cleaning and Handling Method
Never touch the coated area of the mag roller with your fingers.
Print quality can be significantly impaired by doing so. You should
not use any type of solvent to remove residual toner from the mag
Magnetic Roller
roller surface. The best cleaning method is compressed air. OPC
case boxes are good storage areas to prevent scratches and nicks on
the mag sleeve surface.
Handle the PCR by the metal axle or use latex gloves. Apply
Anakenisis® PCR cleaner to a clean, lint free cloth, and wipe the
PCR
PCR until all residue is removed. Always wrap the PCR in a clean
cloth to prevent damage to the coated areas.
Use compressed air to remove residual toner from the surface of the
OPC. Wrap in a clean cloth, and set aside in a dark place to
minimize light exposure. Drum cases are ideal storage containers
OPC


to protect the OPC surface from light, scratches and nicks. Never
touch the coated area of the OPC with bare hands; skin oils will
cause image defects.
All urethane blades should be cleaned with a lint free cloth
Wiper/Doctor Blades
saturated with 99% IPA.
Component Cleaning and Handling Techniques
Canon® CX,SX™
Component Cleaning and Handling Method
Never touch the coated area of the mag roller with your fingers
because you can impair print quality. You should not use any type
of solvent to remove residual toner from the mag roller surface.
Magnetic Roller
Instead, sue compressed air. OPC case boxes help prevent
scratches and nicks occurring on the mag sleeve surface when used
as sleeve storage areas.
The best method for cleaning the corona assembly is to soak it in an
Ultrasonic Bath. If this is not available, you can use Scotchbrite®
Corona Assembly
and a cotton swab to gently clean the wire.
Use compressed air to remove residual toner from the surface of the
OPC. Wrap in a clean cloth, and set aside in a dark place to
minimize light exposure. Drum cases are ideal storage containers
OPC
to protect the OPC surface from light, scratches and nicks. Never
touch the coated area of the OPC with bare hands; skin oils will
cause image defects.
All urethane blades should be cleaned with a lint free cloth
Wiper/Doctor Blades
saturated with 99% IPA.

Read More..